(0)
Back
Cigweld
Cigweld Spool Gun BZ24 6m CSG275
SKU: W52BS24E6
Length: 6m, FEC Type: BZ24 Style M6 X L: 28mm, Connector Type: Euro Connector, CO2 Duty Cycle: 250A@ 60%, MIXED Gas Duty Cycle: 220A@ 60%
DownloadMIGHTY, OUTSTANDING!
-
Need to weld Aluminium and want to minimise feedability issues?
The CSG275 Spool Gun has been designed specifically for just that – providing smooth, effortless aluminium welding. With its easy-access spool compartment, adjustable feed roll pressure arm and comfortable handle, forget about the days when you constantly burnt contact tips and couldn’t get the right wire feed speed, you can now take easy control of your welds and perform at your best. It comes fitted with a 1.0mm U-Groove Feed Roll.
Do you need to weld inside the hull of a boat?
With its 6-meter-long power cable you will have plenty of reach to get into the most remote areas and do your job effortlessly! And with the integrated Wire Feed Speed control knob you will be able to fine-tune your weld characteristics remotely!
-
It gets better!
THE CSG275 WORKS SYNERGICALLY WITH OUR BLUEVENOM XF ECO-PRO PLATFORM!
Looking for a Push-Pull gun? Check out the Flame Series Push-Pull Gun 8m CPP350
There are very few machines that have been designed to work synergically with direct connecting (no further wiring) to Spool Guns and Push-Pull Guns. Well, the BlueVenom XF353 – in conjunction with the 4R-Rover, are the exceptions! These new Spool and Push-Pull Guns have been designed, tested and developed from the conception of the BlueVenom XF ECO-PRO machines and have been integrated so you can seamlessly transition from a regular MIG gun to the CSG275 or CPP350 whenever you need it! Not only that, but these GUNs also work Synergically with the PulseMate pendant! With these new guns + the PulseMate, turn your XF ECO-PRO setup into an Aluminium Fabrication powerhouse! With the right gear, there’s no stopping your inner Welditude!
-
Feed Roller Kits
P/N FR130909SW FR130909AL FR130909FC
F/Rolls Included 0.8/0.9/1.0/1.2 0.8/0.9/1.0/1.2 0.8/0.9
Refurbishing Kit
P/N: W72PSRFKT
Includes all the major parts to service the wire-feeding mechanism on both the CSG275 Spool Gun and the CPP350 Push-Pull Gun.
SPOOL HOLDER COVER
BRAKE ASSEMBLY
WIRE FEEDER COVER
PRESSURE ARM ASSEMBLY
FEED ROLL RETAINING SCREW
FEED ROLL MOUNT ASSEMBLY
POTENTIOMETER
Length (m)
6m
Duty Cycle: C02
250A@60%
DUTY CYCLE: MIXED GAS
220A@60%
FRONT END
BZ24*
BACK END
EURO
