Back Back

Blue Venom XF186

SKU: W1400186

Multi Process Welding Inverter

The BlueVENOM XF186 is an ideal solution for DIY projects around the home, workshop, worksite or light fabrication, maintenance and repairs! Although simplistic in design, CIGWELD have still included “Opti-Start”, a feature that allows the user to customise their starting arc characteristics through Soft and Hard Start controls.

BlueVENOM XF186 – Multi Process Welding Inverter

The BlueVENOM XF186 is an ideal solution for DIY projects around the home, workshop, worksite or light fabrication, maintenance and repairs! Although simplistic in design, CIGWELD have still included “Opti-Start”, a feature that allows the user to customise their starting arc characteristics through Soft and Hard Start controls.

Additionally, this machine has the following features built-in:

• 2 x Roll All-Driven (top & bottom) Wire Drive system
• Robust fold down handle
• Synergic MIG with Plate Thickness selection / MIG Manual / STICK / LIFT TIG • MIG Wire Inch button
• MIG Gas Purge Button
• MIG Side door wire installation, side loader
• MIG Spool Gun Compatible
• STICK with Voltage Reduction Device (VRD) built-in for Safe Welding
• TIG Foot Control Compatible
• TIG Dial Remote Torch Compatible

  • SIMPLE, PORTABLE, YET INTUATIVE!

    • The BlueVENOM XF186 is loaded with Xtra Functions that pack a serious sting to get the job done!

    • 30% smaller than some other machines in its class and lighter in weight at only 10kg’s – BlueVENOM is here – ready to release your inner Welditude©!

    • This Synergic 3-in-1 predator takes the guesswork out of welding with its pre-defined QuickSet plate thickness selection settings – simply select your gas (if you’re using it), wire diameter and your plate thickness – then arc away!

    • With a simplistic, no frills control panel, and glove-friendly easy-press buttons, the XF186 is a 10 Amp ‘Plug n’ Weld’ unit delivering refined arc characteristics through its ‘Opti-Start’ arc technology.

  • NO FRILLS JUST SET N’ WELD!

    • QuickSet, simple to set & weld
    • Suitable for 100mm and 200mm Diameter Spools
    • MIG Gasless and MIG Gas Shielded
    • Blue LED metres for clear viewing
    • Fine tuning of Pre-Set Wire Speed & Volts
    • Full control over manual settings
    • Welding wire size selection
    • Spool Gun compatible, great for Aluminium (sold separately)
    • Recommended MIG & TIG welding thickness range 0.6mm – 10mm
    • Recommended STICK welding thickness range 1.6mm – 12mm
    • Weld most metals including Mild Steel, Stainless Steel, Aluminium and Bronze

    • CIGWELD have specially configured this machine to be able to produce great welding results from domestic household 230V/240V x 10A power

  • AWESOME OUTPUT FOR A SMALL MACHINE

    The BlueVENOM XF186 delivers a maximum output of 186 Amps DC in MIG and TIG Modes, which means the machine is capable of welding metals from 0.6mm up to 10mm. In STICK mode the machine is capable of welding metals from 1.6mm up to 12mm in thickness.

  • PACKAGE CONTENTS

    • BlueVENOM XF186 Power Source
    • MIG Gun 3m- Euro quick connector
    • Work Clamp with 3m Lead
    • Twist Lock Electrode Holder with 3m Lead
    • 2 x Feed Rolls: 0.8/0.9mm Gasless, 0.8/0.9mm Solid Wires (Fitted). • 2m Argon Gas Hose and Gas Regulator/Flowmeter
    • Includes Nylon Inlet Guide for use on Soft Alloy Wires
    • Operating Manual

  • WARRANTY PERIOD

    2-Year conditional warranty. See terms and conditions at cigweld.com.au or in the Operating Manual, included with the machine.

    Register online for a 6 months extended warranty!

     

    ORDERING DETAILS

    BlueVENOM XF186 Package.
    P/N: W1400186

     

Power Supply (Voltage)
Single-Phase 230V/240V +/- 15%

Australian Standard
AS 60974.1:2020

Nominal Supply Frequency
50/60Hz

Supply Lead and Plug supplied
10 Amp

Minimum Single Phase Generator Recommendation
10kVA (at 0.8 Power Factor) at Max Amps

Amperage Range (MIG)
30 – 186A

Voltage Range (MIG)
15.5 - 26.0V

MIG (GMAW) Duty Cycle @ 40°C, 10 minutes
185 Amps @ 9%
72 Amps @ 60%
56 Amps @ 100%

STICK (MMAW) Duty Cycle @ 40°C, 10 minutes:
160 Amps @ 10%
65 Amps @ 60%
50 Amps @ 100%

TIG (GTAW) Duty Cycle @ 40°C, 10 minutes
186 Amps @ 10%
76 Amps @ 60%
59 Amps @ 100%

Nominal DC Open Circuit Voltage in MIG Mode
52V

Open Circuit Voltage (VRD On) STICK Mode
<35V

Weight of Power Source
10kg

Power Source Dimensions (mm)
L: 465 x W: 190 x H: 340

Weight of Full Package
16.6kg

Full Package Dimensions (mm)
L: 530 x W: 295 x H: 345

Protection Class
IP21S

PRODUCT SAFETY NOTICES / RECALL
This is default text for notification bar