$163.45
The COMET Fitted Twin Hose is a top-of-the-line oxy/acetylene hose designed for use in the gas industry. With a length of 15 meters, this hose is perfect for connecting oxy/acetylene gases to your welding or cutting equipment with ease and efficiency. The twin hose design allows for the convenient and simultaneous flow of both gases, optimizing your workflow and ensuring a consistent and reliable supply.
Features include:
• All COMET hoses undergo stringent quality checks, ensuring quality and compatibility with relevant COMET hose fittings.
• Colour coding of hoses and different threads for fuel and oxygen prevents incorrect connections of hoses to the wrong gas type.
• COMET factory fitted hose assemblies are available in twin hose configurations. This helps keep the work area tidy and reduces the risk of damage.
• Secure, specifically designed hose fittings ensure operator safety
It is important to use the correct type of hose for the required gas(es) to be used. Any non-standard application should always be checked by and approved before being put into operation. Pressure drops will occur through hoses and hose fittings, therefore allowances must be made to compensate for this when setting up equipment and adjusting regulators. 10mm bore hose should be used for large flow applications and where long lengths of hose are to be used. Colour coding of hoses and different threads for fuel and Oxygen prevents incorrect connections of hoses to the wrong gas type. CIGWELD twin hoses help to keep the work area tidy, which reduces the risk of hose damage.
SAFETY NOTICE – HOSE LENGTH
As per abstract from Australian Standard AS4839-2001 for guidelines on safe use of portable oxy-fuel gas systems Section 6.5 Hoses. ‘The maximum hose length shall be 15 metres for each gas, or such distance which will allow the operator of the hand-held equipment to be in sight of all the supply cylinders, whichever is the smaller. Hoses shall be single length.
NOTE: Where single lengths not practicable, lengths of hose up to a total length of 15 metres may be joined using only fittings that comply with AS4267.
If hoses exceed 15 metres, the operator must be in sight of the supply cylinders as per the standard.
Obtain a copy from Standards Australia at www.standards.org.au
P/N: 308624
Out of stock
Unmatched Local Expertise & Support
Also available here online
If you need further information
Talk to us on 1300 654 674
| Brand | |
|---|---|
| Connection | |
| Gas Type | |
| Length | |
| Nominal Bore Diameter | |
| Standard |
| Brand | Cigweld | Gas Type | Oxy/Acetylene |
| Length | 15m | Connection | 5/8"-18 UNF RH + LH both ends |
| Standard | AS1335 | Nominal Bore Diameter | 5mm |
| Brand | Cigweld |
| Gas Type | Oxy/Acetylene |
| Length | 15m |
| Connection | 5/8"-18 UNF RH + LH both ends |
| Standard | AS1335 |
| Nominal Bore Diameter | 5mm |
For over 100 years, CIGWELD has proudly served Australian industry with trusted, high-performance welding equipment.
Local Expertise & Support
CIGWELD is committed to providing exceptional customer service, with products backed by local expertise and nationwide support.
As part of ESAB, CIGWELD benefits from world-leading innovation and technology, ensuring our customers get access to the most advanced and reliable solutions available.
Find your nearest CIGWELD ESAB distributor or service agent.. Search by postcode or suburb to locate trusted partners who stock our products and support our full range of welding solutions.
Also available here online
Download
