WeldSkill Harda – 3.2mm – 10 rods
SKU: WEH0232
WeldSkill Harda is a basic electrode for the hard surfacing of steel components subjected to wet or dry hard particle abrasion and low to moderate impact loading. The air hardening, low alloy steel deposit of Weldskill Harda remains crack free on most steels under normal welding conditions and is therefore recommended for hard surfacing components […]
Generate a PDF conformance certificate for this product
GENERATE CERTIFICATEWeldSkill Harda is a basic electrode for the hard surfacing of steel components subjected to wet or dry hard particle abrasion and low to moderate impact loading.
The air hardening, low alloy steel deposit of Weldskill Harda remains crack free on most steels under normal welding conditions and is therefore recommended for hard surfacing components subject to flexing during service.
The basic flux coating gives excellent resistance to rust, mill scale, dirt and oil on the surface being hardfaced. Typical applications include the surfacing of agricultural points, shares and tynes, grader and dozer blades, conveyor screws and post hole augers etc.
FEATURES:
• Basic Type Manual Arc Welding Electrode.
• Resistant to Hard Particle Abrasion and Moderate Impact Loading.
• Air Hardening, Crack Free, Martensitic Steel Deposit – 650 HV30
AS/NZS 2576:
1855-A4.
W.T.I.A. Tech Note 4:
1855-A4.
Diameter (mm)
3.2
Current Range (amps)
Min 105
Max 135
Single Layer on Mild Steel
HRC 55
HV30 600
All Weld Metal Deposit
HRC 57
HV30 640