fbpx
Back Back

Cigweld

WeldSkill 180 AC/DC TIG Welder Power Pack – 2022

SKU: PP180AA21

RRP $1675 INC. GST

Only at Participating Distributors while stocks last. Please note this cannot be purchased through this website.

Only at Participating Distributors while stocks last. Please note this cannot be purchased through this website.

ac dc tig welder

The CIGWELD WeldSkill 180 AC/DC is a compact and light weight 12kg TIG Inverter that has the added flexibility and portability of a 10 Amp plug to maneuver easily around your workshop.

This unit is specifically designed for the budget-conscious user who doesn’t want to sacrifice on quality or weld results. With its compact casing and IP23S rating the 180 AC/DC is ideal for indoor or outdoor use around the workshop and is easy to carry and manoeuvre into hard to reach places when doing light fabrication and maintenance of mild steels, stainless steels and aluminum.

In TIG mode the unit has all the features required to customise your welding preferences – High Frequency (HF), Up/Down Slope, Pre/Post
Flow, 2T/4T Trigger Function, Spot Mode and Gas Purge for AC or DC TIG welding. When welding in AC only, Frequency and Wave Balance can be refined with impressive adjustability and when operating in Pulse Mode the user has full flexibility to adjust Frequency, Width and Peak Current.

In Stick mode the 180 AC/DC features VRD, Anti-Stick and Hot Start and can weld with up to 3.2mm electrodes. The CIGWELD WeldSkill 180 AC/DC comes as a complete kit with an 4m Remote Control TIG Torch, Argon Regulator/Flowmeter, 4m Electrode Holder and Work Clamp and a TIG Accessory Kit with tungstens, nozzles, collets etc. to get you up and welding in no time.

3 Year Warranty included

Power Pack Contents:

WeldSkill 180AC/DC Pack
Weldskill Essential Auto Darkening Helmet 9 -13 Black
TIG Welding Gloves – Large
Wire Brush 4 Rows Straight Stainless Steel Bristles
Weldskill 70S-6 2.4mm 900mm 1kg TIG Rods
Weldskill 316L 2.4mm 900mm 1kg TIG Rods
Weldskill 5356 2.4mm 900mm 1kg TIG Rods
3T Rare Earth Tungsten 1.6mm X 175mm AC/DC Purple Tip 1 Packet – 2ea.
3T Rare Earth Tungsten 2.4mm X 175mm AC/DC Purple Tip 1 Packet – 2ea.

 

 

ac dc tig welder

The new WeldSkill Essential Welding Helmet is the perfect entry level helmet for those DIY welders on a budget who don’t want to sacrifice on safety.

  • 2 Sensor Auto-darkening variable shade 9-13 filter lens.
  • 94mm x 36mm viewing area.
  • Medium Impact Rating.
  • Fast Reaction Time.
  • Adjustable Sensitivity and Delay.
  • Complies to AS/NZS1337:2010 and AS/NZS1338.1:2012.
  • 1 Year Limited Warranty.
  • Featuring the industry’s top 1/1/1/1 clarity rating.

Form fitting welding gloves that are suitable for a range of welding applications. Ideal when you need that extra dexterity in TIG welding applications. Form fitting welding gloves suitable for a broad range of welding applications. Fine grain leather constructions provide superior flexibility and dexterity for TIG welding applications. Kevlar stitching for increased durability.

ac dc tig welder
ac dc tig welder

Wire brushes are an excellent choice for removing rust, oxidisation, paint, weld splatter and other surface contaminants.

Every welder need a good reliable wire brush.

  • Suitable for AC & DC TIG Welding
  • Excellent ignition characteristics and consistent welding properties
  • Long service life compared to thoriated electrodes
  • Non radioactive to improve health and safety for operator and environment
ac dc tig welder
ac dc tig welder

WeldSkill 70S-6 is a copper coated, low carbon steel filler rod suitable for the oxy-acetylene (fusion) welding and Gas Tungsten Arc (TIG) welding of a wide range of mild and medium strength steels.

WeldSkill 70S-6 is recommended for the TIG welding of steel pipes, plates and castings with a tensile strength in the 500 MPa class. It is tolerant to surface rust and mill scale and is ideal for root pass welding applications where tough and ductile welds are produced.

When using WeldSkill 70S-6 for gas welding applications a neutral to slightly reducing flame setting is recommended.

WeldSkill 316L stainless steel is a high quality low carbon rod for the Gas or Gas Tungsten Arc (TIG) welding of Molybdenum bearing stainless steels; in particular matching 316 and 316L alloys.

WeldSkill 316L is also suitable for the general welding of other 300 series stainless steels including 302 and 304; as well as ferritic stainless steels grades such as 409, 444 and 3Cr12.

ac dc tig welder
ac dc tig welder

WeldSkill 5356 is a high quality, Aluminium – nominal 5% Magnesium alloy rod suitable for the Gas or Gas Tungsten Arc (TIG) welding of a wide range of cast and wrought Aluminium alloys.

It produces intermediate deposit strength and good ductility and corrosion resistance for the Gas or Gas Tungsten Arc Welding (GTAW / TIG) of a wide range of 3XXX, 5XXX, 6XXX and 5XX Aluminium alloys. See CIGWELD Aluminium Alloy Selection Chart for detailed welding consumable selection criteria for a wide range of Aluminium alloy parent metals.

Current Range
10-180A (TIG Mode), 10-130A (STICK Mode)

Dimensions
324H x 176W x 430D mm

Duty Cycle
HF TIG: 180A @ 15%, 17.2V (40C, 10mins)
STICK: 130A @ 15%, 25.2V (40C, 10mins)

Generator Requirement
8kVA

Open Circuit Voltage
(VRD On) <35V, (VRD Off) 63V

Processes
AC/DC HF TIG (GTAW), Stick (MMAW)

Supply Voltage
240V, +/- 15%, 50/60Hz

Weight
12kg (Power Source), 20.5kg (Package)

Supply Plug & Lead
10A

Protection Class
IP23S

Standards
AS 60974.1-2020 / IEC 60974-1