Transtig 220AC/DC Power Source

This product is now obsolete. Refer to WeldSkill 205 AC/DC (P/N: W1008205)

The Transtig 220AC/DC gives you high-quality aluminium welding from a single phase power source. Light enough to swing over your shoulder but more than powerful enough for balustrade work, air conditioning piping or sheet metal fabrication, it’s a machine that can be relied upon for multiple applications. Thanks to a clever bit of technology called Power Factor Correction (PFC), the Transtig 220AC/DC is not only energy efficient but it will also run off a small generator too – perfect if you’re out in the field or on a remote site.

• Fully compliant to AS 60974.1-2006 rated to IP23S
• Power Factor Correction (PFC) Improves product efficiency
• Digital Voltage and Amperage Meters
• Power source is fitted with HF start in TIG mode
• 3 Year Limited Warranty*
• Power source fitted with Pulse Welding capabilities in TIG mode
• Can use up to 4.0mm electrode size*
• VRD Virtually eliminates electric shocks when not welding
• Fail to Safe Shutdown
• Spot Welding
• Stores up to 100 welding jobs
• Intelligent Fan Control

*Product not suitable for Cellulose Electrodes (6010)

Australian Standards
AS 60974.1-2006 / IEC 60974-1

Current Range
Stick (MMAW) 10-170A TIG (GTAW) 3-220A

Dimensions
326H x 185W x 483D mm

Duty Cycle
Stick (MMAW): 40% @ 170A (26.8V), 60% @ 140A (25.6V), 100% @ 120A (24.8V)
TIG (GTAW): 40% @ 220A (18.8V), 60% @ 180A (17.2V), 100% @ 160A (16.4V)

Effective Input Current
14.7A

Factory Fitted Plug Rating
15A

Generator Requirement
6kW (7.5VA @ 0.8PF)

Nominal Supply Frequency
50/60Hz

Number of Phases
1

Open Circuit Voltage
23V DC (VRC ON)

Protection Class
IP23S

Supply Voltage
240V /- 15%

Weight
13.4kg