Back Back

Cigweld

Transmig 250i Plant

SKU: W1003250

The CIGWELD TRANSMIG 250i is a self-contained single phase multi-process welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes. The unit is equipped with an integrated wire feed unit, the voltage reducing device (VRD applicable in stick mode only), PFC (Power factor correction), digital voltage and amperage […]

The CIGWELD TRANSMIG 250i is a self-contained single phase multi-process welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes. The unit is equipped with an integrated wire feed unit, the voltage reducing device (VRD applicable in stick mode only), PFC (Power factor correction), digital voltage and amperage meters and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.

 

The Transmig 250 gives excellent performance on mild steel, stainless steel, aluminium, silicon bronze and some hard facing wires with Argon based shielding gases.

Ideally suited for light fabrication, rural and heavier maintenance applications.

  • Full Multi-Process Capabilities: GMAW/FCAW (MIG), MMAW (Stick), GTAW (TIG)
  • Standards Compliant Voltage Reduction Device (VRD)
  • Fully Compliant to AS 60974.1
  • Digital Voltage and Amperage Meters
  • Enclosure Rated to IP23S
  • PFC ( Power Factor Correction)
  • 3-year Limited Warranty

CONTENTS:

  • Transmig 250i Inverter power source
  • Tweco Professional Fusion MIG Torch, 3m
  • COMET Professional Argon regulator/flowmeter
  • Feed Rolls: 0.6/0.8mm V Groove (fitted); 1.0/1.2mm V Groove;
  • 1.0/1.2mm U Groove 0.8/0.9mm V Knurled; 1.2/1.6mm V Knurled
  • Contact tips: 0.8mm (fitted); 0.6mm; 0.9mm; 1.0mm
  • Electrode holder with 4m lead
  • Work clamp with 4m lead
  • Shielding gas hose assembly
  • Operating manual

Current Range
10-250amps

Dimensions
630H x 378W x 705D mm

Duty Cycle
MIG (GMAW/FCAW): 250A @ 40% | Stick (MMAW): 230A @ 40% | TIG (GTAW): 250A @ 40%

Generator Requirement
Factory fitted supply lead & plug: 8.6kW (10.8kVa @ 0.8 Power Factor)
Upgraded 4mm2 supply lead & plug: 13.2kW (16.5kVa 0.8 Power Factor)

Processes
MIG (GMAW/FCAW), Stick (MMAW), Lift TIG (GTAW)

Supply Voltage
240V AC +/15%, 50/60Hz (15A plug)

Weight (Packed)
42kg

  1. Hasim

    Hi , I have a transmig 250i and I just bought w4014601 tig torch and I want to weld aluminium with , but I couldn’t find any settings on the machine for tig weld … question is is it possible to tig weld with it …??

  2. Michael Caspillo

    Hi,Good day How much the price of this welding machine Transmig 250i Plant.Thanks

Add your review

Your email address will not be published. Required fields are marked *