Back Back

Cigweld

CutSkill Regulator Flowmeter 30 LPM (Vertical Inlet)

SKU: 201030

The 201030 and 201031 Regulator/Flowmeters provide accurate indication of flow rate of shielding gases for MIG and TIG welding processes. The Regulator/Flowmeters have been designed for TIG processes and for MIG, Short Arc and Spray Arc applications and are calibrated for O to 30 lpm. The metering ball is stainless steel. They are constructed with […]

The 201030 and 201031 Regulator/Flowmeters provide accurate indication of flow rate of shielding gases for MIG and TIG welding processes. The Regulator/Flowmeters have been designed for TIG processes and for MIG, Short Arc and Spray Arc applications and are calibrated for O to 30 lpm.

The metering ball is stainless steel. They are constructed with a machined brass body and cap, are back pressure compensated and have a self-reseating relief valve – not designed to protect down stream equipment.

  • Maximum 30 LPM Flow Rate
  • Maximum Inlet Pressure 20,000kPa
  • Robust brass body and fittings
  • Failsafe against over pressure

Calibrated flow rates at 345 kPa inlet pressure.

  • 0 to 30 lpm (Vertical / Side Inlet)
  • Inlet connection 5/8” BSP – 18 Type 10
  • Outlet connection 5/8” – 18 UNF – RH

There are no reviews yet.

Add your review

Your email address will not be published. Required fields are marked *