Aristo Mig C3000i, U6
The ideal system for the professional user working with advanced applications up to 300A. ESAB Aristo® Mig C3000i, U6 is the ideal partner when it comes to efficient production or prefabrication of high alloyed materials with a very high demand for the welding performance. Aristo® Mig C3000i, U6 gives you the choice of the following […]
The ideal system for the professional user working with advanced applications up to 300A.
ESAB Aristo® Mig C3000i, U6 is the ideal partner when it comes to efficient production or prefabrication of high alloyed materials with a very high demand for the welding performance. Aristo® Mig C3000i, U6 gives you the choice of the following processes; MIG/MAG, QSet™, synergic MIG/MAG, synergic pulsed MIG and MMA.
The choice of the welding process is made on the control panel.
The power source is based on inverter IGBT technology that provides reliable equipment with outstanding welding characteristics. The communications and control CAN-bus system means fewer cables, which in turn increases operational reliability.
- Reliable and smooth weld starts and stops supported by efficient Hot-start and crater fill functions
- Excellent Pulsed MIG welding performance
- User-friendly control panel
- Wide range of pre-programmed synergic lines
- Memory for 10 welding parameter sets
- QSet™ – automatic setting of short arc MIG/MAG welding parameters
- ESAB LogicPump ELP – secures automatic start
of water pump when connecting a PSF water cooled welding torch
TrueArcVoltage System™ – measures the correct arc voltage value independent of the length of the PSF™ welding torch
Integrated feeding system for all applications
Aristo ® Mig C3000i, U6 has the feeder built into the power source to form a compact and versatile unit. The four-wheel wire feed system takes wire spools up to 300mm and feeds wires between 0.6 and 1.2mm with wire feed speeds between 0.8 and 25m/min.
The TrueArcVoltage System™
By combining the Aristo® Mig C3000i, U6 with an ESAB PSF™ torch you are guaranteed a weld with the correct arc voltage independent of any voltage drop in the torch cable. This means that you will get the same arc voltage and weld result regardless of the length and status of the torch.
Synergic lines and pulsed welding
The user-friendly control panel Aristo® U6 provides the Aristo® Mig C3000i with ESAB’s data bank of synergic lines giving you one-knob setting for MIG/MAG and pulsed MIG.
The pulsed MIG welding performance is excellent, making the Aristo® Mig C3000i, U6 an ideal machine for difficult materials such as aluminium. Simply set the wire feed speed and the QSet™ function will automatically select the correct welding parameters for your wire/gas combination. QSet™ does this for all gas and wire combinations, CO2 and MAG Brazing alike and without any need for synergic lines.
QSet™ is the quick and easy way of finding optimised welding parameters for the best quality weld. Spatter and set-up time are reduced to a minimum. It is simple and straightforward to set a new working point with QSet™. Only change the wire feed speed to match the required welding power and QSet™ will select all other parameters for an optimised welding result in the whole short arc area.
All this with only one knob control.
To see the full range of our Aristo and other ESAB Welding Machines, click here.
Open Circuit Voltage
Energy Save Mode
Power Factor at Maximum Current
Efficiency at Maximum Current
625L x 410W x 420H mm
Wire Spool Capacity
Maximum Spool Diameter
Stainless Steel: 0.6-1.2mm
Cored Wire: 0.8-1.2mm
-10 to +40 °C
IEC/EN 60974-1, -10