Click and Collect Australia Wide
1300 654 674 [email protected]

Welcome to our Welding Tips section! You can expect this section to be updated regularly with welding tips, for our site launch we’ve decided to start with some welding basics, keep your eye’s posted for more welding tips as our website expands further.

5 Questions to ask to get the job done!

Article relating to choosing the correct Hardfacing Alloy to ensure you make that’s best for your application.
View the great article here!

 

High Deposition Rate Welding with Nickle Flux Cored Wires

View the great article here!

 

Welding Basics

Practice

The number one tip for welding is to remember that everyone has to start out somewhere. It takes time and practise to get the skills down pat. One of the simplest ways to get your skill up is to acknowledge your welding faults, cut them out, and restart them again later. Also, another form of practice that is useful is to ensure you are test welding before you weld only your main work piece. With time you will learn how your welder reacts to your actions and you will get better!

Welding Speed

This is one of the main things you will learn as you practice. What speed you should apply and how it affects your welding effort. It’s a pretty straight forward concept. If you rush, you can expect thin, weak welds, slow it down! If you’re going to slow, you can expect splattering and a wide thick convex weld, speed it up! You’ll get it right once you learn the intricacies of your welding machine.

Position

Without getting to in-depth into this topic, the way you hold your welder is paramount to a successful weld. Research, your particular welding method, and how you should hold your apparatus to get a successful weld. Ensure you practise your movement over your welding piece with the welder turned off to get a good idea of what movements and positioning you will need to perform.

Other

As mentioned earlier, test welding while you’re still new is very important, in particular, when you are using a MIG welder, getting the right wire speed / voltage / amp settings can be tricky when you’re first starting out. But if you keep at it, you start to learn what to expect from your changes to these settings. Another great tip, and this is something you may get into the habit of, is to tack your work pieces together to start off with, and then proceed to perform your weld. This will help prevent warping, and to ensure that your work pieces stay in place when you begin welding!